Structured cabling, fibre and telco civil works in Hobart and southern Tasmania
Go Comms is a structured cabling and fibre contractor based near Hobart, working across Hobart and southern Tasmania. We install the cabling that WiFi, CCTV, phones and property systems depend on, in hotels, accommodation and commercial buildings.
ACMA registered cablers · Fluke certified test results · As built documentation
Call 0490 120 268Book a site walkthrough
ACMA registered cablers
Certified and insured
Operating since 2016
Hotel and hospitality specialists
WHAT WE DO
Copper, fibre, comms rooms and civil works
We install the cabling that WiFi, CCTV, phones and property systems depend on, in hotels, accommodation and commercial buildings.
Copper data cabling
Copper data cabling to outlets, access points and cameras.
Fibre backbones and splicing
Fibre backbones between comms rooms, floors and buildings, including splicing.
Comms rooms and racks
Comms room and rack builds, patching and cable management, and tidy ups of existing comms rooms.
Telco civil works
Trenching, boring, and pit and pipe for fibre between buildings and to the street.
Point to point wireless
Point to point wireless links between buildings and sites where trenching is not practical or too costly.
Not sure where to start?
Call 0490 120 268 or email chris.gray@gocomms.tech to book a site walkthrough.
TESTING AND DOCUMENTATION
Tested, certified and documented
Cabling and fibre are installed by ACMA registered cablers, tested and certified, and labelled to match the drawings. At handover you get Fluke certified test results and as built documentation.
- Installed by ACMA registered cablers
- Tested and certified
- Labelled to match the drawings
- Fluke certified test results at handover
- As built documentation at handover
PROPERTIES THAT STAY OPEN
Working in a property that stays open
In hotels and accommodation we stage cabling around occupancy, working between checkout and check-in, so rooms are back in use the same day.
HOW IT WORKS
How a job runs
1
Book a site walkthrough
Call 0490 120 268 or email chris.gray@gocomms.tech.
2
Install
Copper, fibre, racks and civil works, staged around guests, staff and trading hours.
3
Test, certify and label
Cabling and fibre are tested and certified, and labelled to match the drawings.
4
Handover
Fluke certified test results and as built documentation.
WHERE WE WORK
Hobart and southern Tasmania
We are based near Hobart.
- Greater Hobart
- Glenorchy
- Clarence
- Kingborough
- Brighton
- Sorell and the Tasman Peninsula
- the Huon Valley
- the Derwent Valley
- the Southern Midlands
FAQ
Common questions
Call 0490 120 268 or email chris.gray@gocomms.tech to book a site walkthrough.
Are your cablers registered?
Yes. Our cablers are ACMA registered.
Do you provide test results?
Yes. Structured cabling and fibre work is tested and certified, and you get the results with the as built documentation at handover.
Can you link two buildings?
Yes. We run fibre and do the civil works for it, including trenching, boring and pit and pipe, or install a point to point wireless link where trenching is not practical.
Can you tidy up an existing comms room?
Yes. We rebuild racks, re-patch, label and document existing comms rooms.
Do you work in buildings that stay open?
Yes. We stage the work around guests, staff and trading hours.
RELATED SERVICES
We also install
Hotel and accommodation WiFi
Guest and back of house WiFi for hotels, motels and accommodation in Hobart and southern Tasmania.
CCTV and security cameras
CCTV for homes, businesses, hotels and motels in Hobart and southern Tasmania.
Talk to us about your cabling or fibre job
Call 0490 120 268 or email chris.gray@gocomms.tech to book a site walkthrough.